NVMe PCIe M.2 SSD to USB 3.1 Type C Gen2 Enclosure - ElecGear 10Gbps External Aluminum Cooling Case, 2280 PCI-E M2 M-Key NGFF HDD Card Reader Adapter, USB C Hard Drive Converter, NVMe Gen3 Caddy Box

Related posts

Feature

[NVMe Enclosure] - The external adapter adopts the latest chipset of USB3.1 Gen2 to PCIe Gen3 x 2 lane bridge controller. Achieving 10Gbps USB data transition from NVM Express PCI-e SSD to PC, MacBook and NAS disk station. Pushing USB3.1 Gen2 to its limit, R/W speed up to 850-1020MB/s with most M2 NVMe NGFF harddrive. Down compatible with USB C Gen1 and USB3.0
[Solid Aluminum] - Premium aluminum casing with CNC technique and thermal silicon pad design. The whole body act as a heatsink to take away the heat from memory module - No cooling fan or extra cooler needed for your expensive NVMe hard drive; Blue LED indicator showing data status on Solid State Drive; Easy installation, Hot-swappable, Plug & Play, No extra drive required
[Compatibility] - Support most PCIe NVMe M.2 M Key SSD with 2280, 2260, 2242, 2230 form factor: Samsung 950 Pro, PM951, PM981, SM961, 960 EVO, 960 Pro, 970 EVO, 970 Pro, WD Black, ADATA XPG, Corsair Force, Crucial, Intel Optane memory 600P, 760P, 900P, Toshiba OCZ RC100, Patriot, SK Hynix, Kingston, Mushkin Pilot, DREVO D1 XTREME Z370; Compatible with multi-OS: Windows and MacOS; Comply with Trim, UASP, Power Saving and upgradable firmware. (Be noticed: SATA-based M.2 SSD are NOT supported!)
[Target Audience] - Ultra-fast 10Gbps throughput, low latency and power efficiency. Perfect for tech nerds, 4K content designers and engineering. At 1000MB/s, Data copy and transferring will be done in no time; For high-end gamers, it greatly speed up games loading on PlayStation PS4 and Xbox One console; We also suggest this to users of Thunderbolt 3 Dock; You put a laptop SSD in, it's a superfast flash card reader
[What's in Package] - 1* ElecGear EL-NV-C01 NVMe PCIe SSD enclosure, 1* USB Type-C to Type-A Gen2 Data Cable (24-inch), 1* USB A2C Convertor (female to male), 5*Screws, 2* Non-slip Silicon Pad, 1* PH00 Screwdriver. (Be noticed: NVMe is NOT included in the product!)

Description

- NVMe PCIe Gen3 x 2 Lane to 10Gbps USB3.1 Gen2 Adaptor
- Premium Aluminum Casing Design with Excellent Cooling Effort
- Support NVMe PCIe M.2 SSD with M Key 2280, 2260, 2242, 2230
- Excellent Heat Dissipation with Thermal Silicon Pad Design
- Well compatible with multi-OS: Windows 7, 8, 10 and Mac OS
- Comply with Trim, UASP, Power Saving and upgradable Firmware
- Easy setup, Hot-swappable, Plug & Play, No extra drive required
- Both of Type-A and Type-C port of host supported with Convertor

Product: EL-NV-C01
Material: Aluminum
Color: Light Gray
Port on Body: USB C 3.1 Gen2
Dimension: 105*45*14mm
Weight: 135g

Tested NVMe List:
Samsung V-NAND M.2 SSD: 950 Pro, PM951, PM981, SM961, 960 EVO, 960 Pro, 970 EVO, 970 Pro, WD Black, ADATA XPG, Corsair Force, Crucial, Intel Optane memory 600P, 760P, 900P, Toshiba OCZ RC100, Patriot, SK Hynix, Kingston, Mushkin Pilot, DREVO D1 XTREME Z370;

Packaging:
1* ElecGear EL-NV-C01
1* USB 3.1 C2A Gen2 Cable (24-inch)
1* USB A2C Convertor
5* Screws
2* Non-slip Silicon Pad
1* PH00 Screwdriver
(NVMe is NOT included!)

Compatibility Note:
1.Compatible with PCIe NVME M-Key M.2 SSD ONLY! It does NOT fit SATA-based NGFF M.2 SSD.
2.Not support disks with AHCI logical interface. Some of disk offered both AHCI and NVMe edition, for example: Samsung SM951. MZ-VPV5120 / 2560 will be supported ONLY!
3.Make sure your PC came with USB3.1 Gen2 port and drives was properly installed. Some PC came with USB C port which does not mean that is USB3.1 Gen2.
4.Some NVMe may need to take off its heatsink to adapt to this enclosure. For example: Plextor M8Pe, M9PeG and some of XPG.
5.The case will be heated up since NVMe producing a lot of heat. This is normal condition.