Check expert advices for injector mold?
When you looking for injector mold, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable injector mold is not an easy task. In this post, we show you how to find the right injector mold along with our top-rated reviews. Please check out our suggestions to find the best injector mold for you.
When you looking for injector mold, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable injector mold is not an easy task. In this post, we show you how to find the right injector mold along with our top-rated reviews. Please check out our suggestions to find the best injector mold for you.
Best injector mold
1. FatFish Plastisol Injector Soft Plastic Fishing Lure Molds Injector Soft Lure Making Tool 45ml
Feature
FatFish aluminium injector for plastisol (soft plastic)FatFish plastisol injector is fully compatible with all FatFish fishing lure molds
FatFish soft plastic injector is perfect fit for Do-It fishing lure making
FatFish Fishing Lure Molds Injector allows you to create your own fishing lures and is perfect for do it soft plastic baits
FatFish lure making tools allows DIY enthusiasts creating soft plastic baits at home using preferred colors, glitters and scents
Description
Material: Aluminium alloy
Weight: 124.00g
Nozzle Diameter: 5/8" (15.6mm)
Volume: 45ml / 1.52oz
Note: Two additional O-rings are included
Product of Ukraine
FatFish soft plastic injector is used to fill bait molds with liquid hot plastisol to make your soft plastic lures
Both the nozzle and piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking
Using FatFish lure making tools to make your own fishing lures is a very rewarding and fun way to create a competitive edge over other anglers. It is fairly inexpensive to get setup to begin lure making. Making your own fishing lures allows you to show the fish a unique lure KIT by using different lure bait shapes, soft lure colors, scent, softness/harness, and soft lure flavor.
REMEMBER the injector gets hot when plastisol is inside, use protective clothing like gloves, long sleeves, pants, and closed toe shoes (no sandals) when pouring hot Luresol. Wear appropriate safety goggles and provide adequate ventilation in your work space too (either a fan or personal respirator).
BUY IT NOW! And you will get that you need to start soft plastic lure making.
2. Aluminium Injector for Soft Bait Mold Plastisol 120ml 4oz Syringe
Description
Size (volume) 120ml / 4oz Nose diameter 5/8inch (16mm). Best aluminium plastisol injector. Injector for making soft lures. This aluminium injector is used to fill bait molds with liquid hot plastisol. This allows DIY enthusiasts creating soft plastic baits at home using preferred colors, glitters and scents.3. Authentic Handmade 45 ml Aluminum Injector for Soft Plastic Fishing Bait Mold Lure Tackle DIY Making
Feature
Volume: 45 ml (1.5 US Fluid Ounce). This volume is a perfect for small and mid size molds - it's light and easy to operate with. This size is recommended for baits of less than 5 inch.Material: Aluminum. Aluminum alloy recommended itself as a light and durable material, which is suitable for mold injectors.
Rubber sealing rings. There are two rubber sealing rings to prevent plastisol from leaking as well as to create more pressure during pumping.
Injection port: 5/8" injection. This diameter has become a standard over the years for soft plastic bait molds. It's an optimal size to create targeted pressurized plastisol flow.
We recommend to put a marking on the piston rod to determine the safe amount of pressure, which can be applied to piston, without accidental exposure of the cap.
Description
1.5 OZ Soft Plastic Mold InjectorMetal injector has a standard 5/8" (16 mm) nozzle diameter, which is compatible with most engineered stone or aluminum bait molds.
Both the nozzle and piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking.
When using this injector please be sure to wear gloves since injector gets hot from the plastisol inside.
The primary usage of this injector is to cast fishing injection bait molds with hot plastisol (soft plastic) to create DIY baits.
4. Aluminium Injector Soft Lure Mold Professional Hand Injector 45ml for Plastisol
Description
Size (volume) 45ml Nose diameter 5/8inch (16mm). Best aluminium plastisol injector. Injector for making soft lures. This aluminium injector is used to fill bait molds with liquid hot plastisol. This allows DIY enthusiasts creating soft plastic baits at home using preferred colors, glitters and scents.5. Authentic Handmade 120 ml Aluminum Injector for Large Soft Plastic Bait Mold Lure Tackle DIY Making
Feature
Volume: 120 ml (4 US Fluid Ounce). This volume is a perfect balance of convenience and verstility. You can fill really large single-cavity molds or mid size multi-cavity molds without moving a bulky injector around.Material: Aluminum. Aluminum alloy recommended itself as a light and durable material, which is suitable for mold injectors.
Rubber sealing rings. There are two rubber sealing rings to prevent plastisol from leaking as well as to create more pressure during pumping.
Injection port: 5/8" injection. This diameter has become a standard over the years for soft plastic bait molds. It's an optimal size to create targeted pressurized plastisol flow.
We recommend to put a marking on the piston rod to determine the safe amount of pressure, which can be applied to piston, without accidental exposure of the cap.
Description
4 OZ Soft Plastic Mold InjectorMetal injector has a standard 5/8" (16 mm) nozzle diameter, which is compatible with most engineered stone or aluminum bait molds.
Both the nozzle and piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking.
When using this injector please be sure to wear gloves since injector gets hot from the plastisol inside.
The primary usage of this injector is to cast fishing injection bait molds with hot plastisol (soft plastic) to create DIY baits.
6. Authentic Handmade Bait Mold Soft Plastic Super Fluke 5" Lure DIY
Feature
📏 Injection: Standard 5/8". This size ensures compatibility with most injectors.🏔 Material: Engineered stone. Stone powder mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds.
💨 Smart air vents design to release air and make sure that soft plastic fills all details of the mold.
💵 Low cost. More than 30-40% cheaper than aluminum molds.
🐟 Detailed bait design. Fine level of detail comparable with aluminum molds and far better than silicone molds.
Description
Fishing bait molds are used to produce DIY soft plastic baits.Molds are made from heat resistant engineered stone.
Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the mold using injector.
When making baits you may add color pigments, attractants, glitters etc to achieve the desired look of the bait.
Oil based greasing or cooking spray can be used to lubricate the mold prior to casting. Although it's not mandatory, it simplifies the bait extraction process and give a nice glossy look and needed scent to the baits.
This product is only the bait mold itself. Additional materials like plastisol, coloring etc. needs to be purchased separately.
7. BUGMOLDS Aluminium Injector Soft Lure Mold Professional Hand Injector 45ml for Plastisol
Feature
LOW COST soft plastic lure 2-part mold DIY for lure making from plastisol or old damaged lures.MOLD MATERIAL: artificial stone. Very durable, long lifetime, fully compatible with plastisol.
INJECTION SIZE: 5/8".
LUBRICATION: recommended, but can work without.
PROTOTYPE:
Description
We are BUGMOLDS: original manufacturer from Ukraine. All for making soft lures: molds, injectors, plastisol, pigments, flavor, taste additives, lubricants, custom 3d-modelling, ready soft lures. B2C&B2B seller. We have USA Stock: 2-5 business days local delivery. Thank you for visiting our store!!!8. Authentic Handmade Senko Worm Bait Mold 5" Soft Plastic DIY Making
Feature
📏 Injection: Standard 5/8". This size ensures compatibility with most injectors.🏔 Material: Engineered stone. Stone powder mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds.
💨 Smart air vents design to release air and make sure that soft plastic fills all details of the mold.
💵 Low cost. More than 30-40% cheaper than aluminum molds.
🐟 Detailed bait design. Fine level of detail comparable with aluminum molds and far better than silicone molds.
Description
Fishing bait molds are used to produce DIY soft plastic baits.Molds are made from heat resistant engineered stone.
Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the mold using injector.
When making baits you may add color pigments, attractants, glitters etc to achieve the desired look of the bait.
Oil based greasing or cooking spray can be used to lubricate the mold prior to casting. Although it's not mandatory, it simplifies the bait extraction process and give a nice glossy look and needed scent to the baits.
This product is only the bait mold itself. Additional materials like plastisol, coloring etc. needs to be purchased separately.
9. BUGMOLDS Aluminium 2-Color Injection KIT 45ml2 Soft Lure Mold Professional Hand Injector for Plastisol
Feature
LOW COST soft plastic lure 2-part mold DIY for lure making from plastisol or old damaged lures.MOLD MATERIAL: artificial stone. Very durable, long lifetime, fully compatible with plastisol.
INJECTION SIZE: 5/8".
LUBRICATION: recommended, but can work without.
PROTOTYPE:
Description
We are BUGMOLDS: original manufacturer from Ukraine. All for making soft lures: molds, injectors, plastisol, pigments, flavor, taste additives, lubricants, custom 3d-modelling, ready soft lures. B2C&B2B seller. We have USA Stock: 2-5 business days local delivery. Thank you for visiting our store!!!10. Authentic Handmade Shiner Shad Bait Mold 3" Soft Plastic DIY Making
Feature
📏 Injection: Standard 5/8". This size ensures compatibility with most injectors.🏔 Material: Engineered stone. Stone powder mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds.
💨 Smart air vents design to release air and make sure that soft plastic fills all details of the mold.
💵 Low cost. More than 30-40% cheaper than aluminum molds.
🐟 Detailed bait design. Fine level of detail comparable with aluminum molds and far better than silicone molds.
Description
Fishing bait molds are used to produce DIY soft plastic baits.Molds are made from heat resistant engineered stone.
Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the mold using injector.
When making baits you may add color pigments, attractants, glitters etc to achieve the desired look of the bait.
Oil based greasing or cooking spray can be used to lubricate the mold prior to casting. Although it's not mandatory, it simplifies the bait extraction process and give a nice glossy look and needed scent to the baits.
This product is only the bait mold itself. Additional materials like plastisol, coloring etc. needs to be purchased separately.