Best pod lock bipod
If you looking for pod lock bipod then you are right place. We are searching for the best pod lock bipod on the market and analyze these products to provide you the best choice.
If you looking for pod lock bipod then you are right place. We are searching for the best pod lock bipod on the market and analyze these products to provide you the best choice.
Best pod lock bipod
1. POD-LOC by KMW
Feature
No tools needed to adjust: Bipod can be locked and unlocked with only your thumb and finger, while you are in position, within seconds.Dirt and weather resistant: The integral dust shields in the Pod-Loc spacer protects the clutch area of the factory Harris mechanism. The clamp lever body is synthetic and the internal parts as well as the spacer are stainless steel.
Low profile: The locking lever can be pulled back slightly to disengage the internal ratchet without effecting the lock tension. Thus, the Pod-Loc clamp lever can be "parked" against the stock to minimize snags when you are on the move. All stainless steel surfaces have been blacked out for a low visual signature.
Standard issue on all U.S.Marine Corp M-40A3 Sniper and S.A.M. Rifles as well as the new FBI and BATF sniper rifles..
No permanent alteration: Your bipod can be restored to issue configuration within 2 minutes.
Description
No tools needed to adjust: Bipod can be locked and unlocked with only your thumb and finger, while you are in position, within seconds. Dirt and weather resistant: The integral dust shields in the Pod-Loc spacer protects the clutch area of the factory Harris mechanism. The clamp lever body is synthetic and the internal parts as well as the spacer are stainless steel. Low profile: The locking lever can be pulled back slightly to disengage the internal ratchet without effecting the lock tension. Thus, the Pod-Loc clamp lever can be "parked" against the stock to minimize snags when you are on the move. All stainless steel surfaces have been blacked out for a low visual signature. Standard issue on all U.S.Marine Corp M-40A3 Sniper and S.A.M. Rifles as well as the new FBI and BATF sniper rifles.. No permanent alteration: Your bipod can be restored to issue configuration within 2 minutes.2. S Lock Ratchet Lever Pivot Lock for S Series Harris Bipod/Caldwell XLA
Feature
Fits all the "S" Series (swivel) bipods,replaces the Tension Adjusting Knob for an easier and firmer Level Control.Allows Harris "S" series bipods to adjust the swivel tension quickly
Easy to use Adjustable ratchet lever replaces the thumbnut on bipods.
mall size of the ratchet lever does not extend beyond the body of the bipod it is installed on.
Package only lock, not include bipod.
Description
Item Type: Bipod Pivot LockMaterial: Heat treated Steel and hard aluminum alloys
Color: Black
Weight: 1.23 oz
Condition: New
Package Details: 1 x Bipod Lock(not included bipod)
Quality products please choose Airdeer
3. MIM Mfg S" Lock for S" Series Harris Bipod
Feature
Fits all the "S" Series (swivel) bipods, replaces the Tension Adjusting Knob for an easier and firmer Level Control.Allows Harris "S" series bipods to adjust the swivel tension quickly and easily by providing extra torque to adjust and lock the tension.
100% American made Ultralight, only 1.1 oz
Heat treated Steel and hard aluminum alloys
Black anodized finish
Description
Fits all the "S" Series (swivel) bipods, replaces the Tension Adjusting Knob for an easier and firmer Level Control. Allows Harris "S" series bipods to adjust the swivel tension quickly and easily by providing extra torque to adjust and lock the tension.4. CRUSHUNT S Lock Ratchet Lever Pivot Lock for S Series Harris Bipod/Caldwell XLA
Feature
Fits all the "S" Series (swivel) bipods, replaces the Tension Adjusting Knob for an easier and firmer Level Control.Small size of the ratchet lever does not extend beyond the body of the bipod it is installed on.
Allows Harris "S" series bipods to adjust the swivel tension quickly and easily by providing extra torque to adjust and lock the tension.
Easy to use Adjustable ratchet lever replaces the thumbnut on bipods.
Description
Item Type: Bipod Pivot LockMaterial: Heat treated Steel and hard aluminum alloys
Color: Black
Weight: 1.23 oz
Condition: New
Package Details: 1 x Bipod Lock
5. B&E Solutions Tactical S-Lock for Swivel Series Harris Bipod and Caldwell Pivot Model Bipod
Feature
Firmly fits all the S-(Swivel) Series Harris Bipods and Caldwell Pivot Model Bipods and replaces the tension adjusting knob for an EASY and SECURE controlMade of Steel and Aluminum, Not Plastic
Easy to install and easy to adjust with ratchet abilities
Ultra lightweight 1.2 oz, Includes optional black metal spacer
Make it easy to adjust the level of your Harris Bipod with this S-Lock
Description
Do you own a Harris Swivel Series Bipod or Caldwell Pivot Model Bipod? If so, you know how difficult it can be to adjust the level of the bipod and completely tighten it by hand. The last thing that you want to do when you are lining up a shot is to have to find that small wrench and use it to adjust your bipod. The S-Lock is a must for many types of shooting styles: Target, Long Range, Precision, Hunting, Competitive, Tactical, Military and Law Enforcement. The S-Lock is a necessary tool for those who require a high degree of accuracy and the ability to quickly adjust the level of the bipod while shooting on various types of terrain. The B&E Solutions S-Lock offers shooters the ability to quickly adjust the level of the bipod without the need for tools, even while wearing gloves. The smart and sleek design of the S-lock makes it a must if you are looking to upgrade your Harris bipod and use it at its full potential. The S-Lock is light, strong, dependable and can be easily installed and ready to use in just a couple of minutes. Installation: The installation of the S-Lock is quick and simple. You will need a in socket wrench or screwdriver that accepts in bits. 1. Remove the bipod from your rifle 2. Loosen the tension knob nut 3. Place your finger over the cross pin on the opposite side of the bipod so that it doesn't fall out when you remove the tension knob nut. 4. Remove the tension knob nut with your wrench and set aside. 5. Remove the tension knob with your hand. (Keep your finger on the cross pin) 6. Place the black spacer over the bolt. 7. Carefully line up the thread of the S-Lock and screw it on by hand. 8. Your S-Lock installation is complete. What's Included: S-Lock Black Spacer Specifications: Materials: Steel & Aluminum Color: Black Weight: 1.2 oz (including the black spacer) Length: Approx. 1.2 in. Threading: Fits the Harris Swivel Series Bipod (S-Series) Condition: New6. Caldwell Bipod Pivot Lock
Feature
Easily adjust pivot tension on all of your XLA Pivot model bipodsSpring loaded "pull" out for easy handle positioning
Second adapter for SAE #10-32 threaded external spring bipods
"C" identifies Caldwell adapter from the SAE adapter
Great for most external spring pivot bipods
Description
The Cadlwell Bipod Pivot Lock works on all XLA Pivot model bipods. It also fits most other brand bipods and includes a #10-32 threaded adapter for SAE threaded pivot model bipods. Easily adjust the tension of your pivot mount without tools.7. UTG Leapers TL-BPDM02 Inc, Recon Flex Bi-Pod, M-LOK, Center Height 8" to 11.80", Matte Black
Feature
Directly attaches to m-lok handguards at the 3 and 9 o'clock positionsErgonomic spring loaded slide locking ring for quick and effortless bipod deployment
Lightweight aircraft aluminum construction with a matte black finish
Description
UTG Recon flex M-LOK Bipod, matte black, center height adjustable from 8"-11.8". features: - directly attaches to M-LOK handguards at the 3 and 9 o'clock positions - ergonomic spring loaded slide locking ring for quick and effortless Bipod deployment - lightweight Aircraft aluminum construction with a matte black finish - versatile bidirectional Bipod legs with 5 posi-lock positions for use on different firearms with varying height clearance and mounting Real estate - fully adjustable legs with 6 precut Extendable lengths and flexible in-between positions lockable via thumb wheel - equipped with textured nonslip rubberized foot pads - center height adjustable from 8.0" to 11.8", requires the length of 2 M-LOK slots per leg. Specifications: - panning: no - posi-lock: yes - Extendable legs: yes - foldable arms: yes - swivel stud mount: no - Picatinny mount: no - reversible Arms-Folding: yes - stand: rubberized stand - material: aluminum - finish: matte black - weight: 13.7 oz.8. Magpul M-LOK Bipod Mount
Feature
Allows for the attachment of most Harris-style stud mounted bipods to m-lok compatible hand Guards and forendsLow-profile, robust, and elegant mounting solution for the most common bipods on the market
Utilizes the direct-connect properties of the m-lok System; bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability
Also compatible with other accessories that attach to traditional Sling studs
Machined from milspec-anodized aluminum; features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included
Description
The Magpul M-LOK Bipod mount allows for the attachment of most Harris-Style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.By utilizing the direct-connect properties of the M-LOK system, The Bipod sits closer to the mounting surface than other adapters while providing superior support to the Bipod for strength and stability. The Bipod mount is also compatible with other accessories that attach to traditional sling studs. Machined from milspec-anodized aluminum, the M-LOK Bipod mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33 in.9. Harris Engineering S-BRM Hinged Base 6-9-Inch BiPod
Feature
This Bi pod is useful For Shooting Off The BenchDescription
The Series s Harris Bipod rotates to either side for instant leveling on uneven ground. The hinged base has tension adjustment and buff springs to eliminate tremor or looseness in crotch area of the Bipod. This is an improved version of the original leg notch Bipod. The legs eject by spring action. Four height settings from 6 to 9 inches. Weight is 13 ounces.10. Leapers TL-BPDK02 Inc, Recon Flex Bi-Pod, Keymod, Center Height 8" to 11.80", Matte Black
Feature
Directly attaches to keymod handguards at the 3 and 9 o'clock positionsErgonomic spring loaded slide locking ring for quick and effortless bipod deployment
Lightweight aircraft aluminum construction with a matte black finish